All Cryl

06 allcryl

ALL CRYL is a high-performance liquid binder, formulated as a synthetic resin aqueous emulsion. Designed for cementitious mixtures and fluids subjected to mechanical stress, it enhances adhesion, flexibility, and particle cohesion, resulting in a denser and more durable matrix.

1. Membranas para piletas de salmuera de litio

Lithium brine ponds are built in salt flats, often reaching dimensions of 100 m x 50 m x 1 m. Brine extracted from nearby wells is deposited and evaporated through natural sun and wind exposure, concentrating lithium salts into lithium carbonate.

The Allcryl membrane plays a critical role:

  • Waterproofs the ponds, preventing brine from seeping into groundwater.
  • Enhances evaporation efficiency by retaining heat.
  • Eco-friendly, durable, and easy to apply, diluted in water at different ratios depending on soil preparation.
  • Lasts 2–3 years in continuous use.
  • If left unused, it naturally degrades, avoiding costly disposal compared to black polyethylene films.

2. Membranes for chemical tanks in the lithium process

In lithium separation processes, caustic and acidic chemicals are used. Waste can be safely stored in Allcryl-lined ponds, as the membrane resists both types. After use:

  • The pond can be left idle and within 2 months the membrane degrades naturally.
  • For reuse: sweep away toxic residues and reapply Allcryl in 2–3 coats.

1. Pools for contaminated fracking water

Fracking extraction consumes up to 1,000,000 liters of water per 1,000 liters of oil. Contaminated water containing hydrocarbons and proppants can be stored in Allcryl-lined ponds for later treatment.
Our Oil Water Green solution remediates this water, making it suitable for industrial use or reuse in new fracking operations.

2. Oil injection mud pools

Drilling muds containing chemicals and synthetic fluids can be safely stored in Allcryl-lined ponds. The membrane resists without degrading or altering its physical properties.

3. Temporary crude oil storage pools

When extraction exceeds tank capacity, ponds up to 2 m deep can be built for temporary crude storage. Allcryl ensures impermeability and, upon degradation, leaves no contaminant residues.

4. Pools for containment of soil contaminated with hydrocarbons

Soil and drilling cuttings contaminated with hydrocarbons can be stored in Allcryl-lined ponds. Bioremediation products like Eco Flash break down hydrocarbons, leaving harmless soil that can be reused without final incineration.

1. Agricultural water reserve tanks

Reservoir ponds can be built to the desired size, lined with 2–3 coats of Allcryl diluted at different ratios.
Advantages:

  • Store water without leakage.
  • Suitable for fish farming (eco-friendly, non-toxic).
  • Degradable: when drained and exposed to sun, they turn into harmless soil within 2 months.

 

1. Containment and remediation pools for open-air dumpsites

Allcryl membranes allow waste to be confined in sealed ponds, preventing groundwater contamination. Additionally:

  • A covering system captures decomposition gases (methane, butane) for energy use.
  • Waste degrades into humus, usable as fertilizer.
  • With prior separation of metals, plastics, and glass, recycling and job creation are promoted.

Physical Properties:
Physical Form: Milky-white liquid
Specific Gravity: 1.015 g/mL
Water Solubility: Fully soluble
ppH (25 °C): 7.0 – 8.0 (aprox.)*

*Reference value, depends on the production batch.

  • Forms a transparent waterproofing film.
  • Enhances adhesion between solid and liquid phases.
  • Improves insulating layers and coatings properties.
  • Acts as a clay hydration retarder, stabilizing mixtures.
  • Increases mechanical strength (compression, tensile, and flexural).
  • Significantly reduces cement matrix permeability.
  • Improves cohesion and flexibility, reducing cracks.
  • Extends durability against abrasion and impact.
  • Reduces fluid filtration losses.
  • 100% water-soluble, easy to disperse.
  • Compatible with most water-based systems and cements.
  • Standard dosage: 1 part ALL CRYL per 3 parts water, adjusted according to desired consistency and performance.
  • For high mechanical strength mixtures, increase to 2 parts ALL CRYL per 3 parts water.
  • Add the ALL CRYL–water mixture to dry cement, mixing thoroughly under constant agitation.
  • Can be combined with other additives for enhanced filtration control or high-temperature resistance.
  • Packaging: 20 L drums and, upon request, 200 L drums.
  • Store in a cool, ventilated place at ambient temperature (5–35 °C).
  • Keep away from heat or ignition sources.
  • Prevent product from freezing.